Top 5 DIY Headphone Stand Ideas: How to Make Different Types of Headphones Stand

Headphones are an essential part of many people’s lives whether you’re a DJ, producer, or like listening to music on your own time.

Do you have a DIY headphone stand? DIY stands are great for many reasons: they’re inexpensive, easy to make, and can be customized to fit your needs.

DIY headphone stands are a great way to ensure that your headphones stay in one place while also looking stylish and neat. DIY headphone stands range from very simple to more complex, but they are all worth the time and effort.

There’s no need to spend extra money on those expensive store-bought ones when you can make your own with some supplies that are lying around your house or at your local hardware store. DIY headphone stands are a great craft for the whole family to enjoy!

In this article, we will discuss the different DIY headphone stands that people use and how each one is made.


Do you need a headphone stand?

It’s hard to find the perfect spot for your headphones when you are not using them. Your desk, a table, or even on top of your computer can do the trick. So why do you need an additional headphone stand? It could be that it just looks nicer and makes room for other things in your workspace.

Improve aesthetics: The stands look nicer than cables coming out from behind your monitor. Also, you don’t have to worry about people tripping over their wires because they’re all hidden neatly away now! There is also plenty of space where there was none which means more room for coffee cups and snacks ;-).

Reduce wire clutter: With cables disappearing into a discreet box instead of cluttering up every surface around your desk, it’s easy to see how these stands will do wonders for a cluttered workspace.

Enhance sound quality: You don’t want those wires interfering with the signal coming from the speakers, do you? Well, now they won’t! The cables are all tucked safely in one place while you enjoy your music without any interruption.

Reduce interference: With no static or other interferences getting in between you and that glorious set of beats, we can say with certainty that this is sure to please. And as a bonus, there are fewer cords, so you’ll never have to worry about whether or not your phone charger has enough juice left again ;-).


How much does a headphone stand cost?

A headphone stand is designed to hold a person’s headphones. These stands are typically rigid and can be mounted on surfaces or set up, so they free-stand, depending on how you want it.

A good headphone stand will have an adjustable headband grip and provide the opportunity for users to store their cords neatly on its backside.

The price of this product depends on how much does a headphone stand costs? There are many different types available with varying prices like $25-$250+.

The most affordable option is usually made from plastic, while more expensive ones are often metal or wood-based.

You can also take advantage of DIY (do it yourself) options where you might find instructions online about how to make your own at home, which could be anywhere from $0-$20.


Different types of DIY headphone stand

This article will be about different types of DIY headphone stands. This includes different materials used, different styles and sizes of the stand, and how to make these designs at home.

Different types of materials:

01. Bookshelf: this is a great choice if you want it on your desk or in the corner; many books can hold headphones also! It doesn’t take up too much space, which makes it perfect for smaller spaces. There are many ways to make one with things lying around in your house like a wood frame from an old picture frame, an old book, a wire from scrap craft projects, etc. You can even use a sleeve from an extra pillowcase, then stick some dowels inside and hang them on the back of your desk!

02. Desk Stand: This is another great option if you want to have it on the side of a table or directly in front of you. It can be hooked onto different surfaces and won’t take up too much space either. One way to make one is by taking a wire hanger, wrapping it around something like an old picture frame, then bending the ends over until they’re as close to each other as possible without actually touching so that when you hang them on the edge of anything with weight (like those long drapes) they will stand straight up instead of falling flat against whatever surface they are hanging from).

03. Hanging Style Stand: This type has wood dowels going through different pieces of wood. One side is different than the other, and they can be wrapped in fabric or additional materials to give them a new look which would go well with any decorating scheme.

04. Drill Stand: This stand is created by drilling holes into plywood, then adding different hooks for hanging headphones on it (usually found at hardware stores).

05. Table Top Stand: A tabletop stand will most likely take up more space than others, but this is a great alternative if you don’t want to drill holes into the wall.

06. Pipe and Board Stand: This stand can be made using different wood pieces that are either already cut or bought at home improvement stores. It’s different from others because it has a metal pipe running through them, giving it more stability than other stands.

07. Industrial Pipe Style Stand: Similar to the pipe and board style but instead of wood being used, these use different types of pipes

08. Slim Design Industrial Style Stands: These stands have been designed with a slim design so that they won’t take up much space in your room. They also come in different colors for you to choose from, which makes choosing one easy if there’s not enough storage space

09. The Vogue Stand: This stand is different from the others because it’s made of wood. It might be a bit more expensive than some other types, but they can come in different colors and are much easier to maintain

10. Wooden Headphone Stands: These stands are perfect for people who want something that looks nicer than metal or plastic, even if they have less storage space available. They also look great when used with computer desks or bedside tables.


Diy headphone stands ideas

DIY Headphone Stand Ideas

A DIY headphone stand is a simple and inexpensive way to change up your home or office look. You can make these stands in many ways, from using different materials like PVC pipes and plywood to creating designs with just cardboard. I have included instructions for making five DIY headphone stands that you will be sure to enjoy!

1. DIY Headphone Stand PVC

Headphone stands are cool and can be fun to make. They also provide a nice resting place for headphones when the music is turned off, but they don’t have much of anything that would allow them to stand on their own.

Luckily, DIY headphone stand PVC options out there for those who want to get crafty with their crafting skills! Here I will show you how easy it is to create your very own in just a few minutes and then bring one or two home before they’re gone from stores.

Here’s what you’ll need:

  • A sheet of a PVC that’s at least 36 “x12.’
  • A hot glue gun and sticks
  • Scissors
  • Spray paint in your choice of color, or you can leave them natural.

That’s it! Let’s get started.

Cut the sheet to size, then cut two strips from one side (these will go on either side for support). Hot glue the smaller strip on each end of the larger piece, which goes around about three inches worth. The other limitations are where you’ll be able to put your headphones when not being used. Are you all done with DIY headphone stand PVC? Now all that needs doing is painting and displaying proudly!

2. DIY headphone stand cardboard

DIY headphone stand cardboard is a quick and easy project that can be completed in less than 15 minutes. It doesn’t take much time to make these DIY headphone stands made of newspapers, magazines, or even other types of packaging materials. With the step-by-step guide below, you will learn how to create these DIY headphones from scratch with ease!

Gather Materials for DIY Headphone Stand Cardboard

  • Newspaper, magazine pages, or other packaging materials.
  • Paintbrush and paint of your choice (optional)
  • Ruler, pencil, scissors, or knife to cut the paper into strips
  • Hot glue gun and hot glue sticks

If you intend on gluing the strips together to create a more sturdy DIY headphone stand cardboard. Otherwise, the string can be used instead as an alternative option that doesn’t require any adhesive, so it’s much easier to construct these DIY headphones from scratch without using glue at all!

The size of the DIY headphone stand is entirely up to you, but generally, they are about seven inches long by four inches wide which usually is the perfect size for most DIY headphone stands.

Instructions:

  • Cover your work surface with scrap paper to protect it from any stray paint spots or glue drips. If you’re looking for a more polished look, then cover the DIY headphones stand cardboard by gluing strips of fabric to them, but this is optional and not necessary. If you want these DIY headphone stands as simple and cheap as possible! Paint one side of each strip, either black or white, depending on what color you prefer.
  • Cut out two seven inches long and four inches wide, so they match up perfectly when assembled. Place both sides facing down onto colors such as black for the outside layer of DIY headphone stand cardboard (optional) and white for the inside layer. Make sure they are both facing DIY headphone stand cardboard.
  • Fold them in half diagonally so that it creates a triangle shape. Place one side of the triangles DIY headphone stands cardboard down on top.
  • Take some glue (optional) and spread it evenly onto each strip, or use masking tape to secure your DIY headphone stand cardboard together at this point! Now you can turn these DIY headphones holders into all different shapes by simply folding the strips into other forms—experiment with what works best for you until you find an optimal design. The most common is a flat, triangular shape that looks like two folded paper plates placed upside down on top of each other.
  • If you have a few DIY headphones stand cardboard with different shapes or sizes, you might want to experiment with combining them for an interesting effect.
  • To make taller DIY headphones holders, use more than one strip by taping the ends of your strips together and gluing it into place as well!
  • For something cool, try writing on your DIY headphone stand cardboard with some acrylic paint after applying glue first so that when they dry, they will be protected from handling and wear and tear.

3. DIY headphone stand wood

Wood is a great material for DIY headphone stands. It can be used to make the most basic designs or even some complex ones with multiple pieces and shapes since it is easy to work with wood.

You have many opportunities when designing your stand. This article will show how easily you can create different kinds of wooden headphone holders using simple tools like screwdrivers and saws common in any household workshop (or garage).

You do not need much time or expense either; this project should only take about an hour from start to finish if you already know what kind of design options you want beforehand.

You’ll find instructions on how to make a few varieties below that illustrate just one way out of countless possibilities:

A simple wooden tripod: This is the easiest stand to make and only requires a few pieces. It’s great for using up scrap wood too! Follow these directions:

Step One: Cut two lengths of three-inch-thick pine board about twenty inches long each; this will give you four posts in total. Would you please make sure they are straight with their edges lined up evenly?

Step Two: Drill holes into both ends centered on the edge of your boards, so there is enough room for your screwdriver or wrench to fit inside them easily without being blocked by other parts when it comes time to fasten things together later on.

Step Three: Fasten one post onto another at right angles (or as close as possible) with the holes you drilled in Step Two facing each other. Follow up with the remaining two posts to form a rectangle shape that is stable on its own without any additional support from your hands or screws.

Step Four: Screw in six more posts evenly spaced around the outside of your first four like this:

  • One post every five inches along one long side (this will be where you’ll put all of the headphones)
  • Two posts perpendicular to those at opposite ends and three feet apart for stability; represent an “X” pattern when viewed from above.
  • The same setup for the second set of two posts at opposite ends of the rectangular base but about eighteen inches away.

Step Five: Finally, drill through both sets of posts and line them up. You can either glue the two sets of six holes together or screw through with a long piece of metal like these.

Step Six: Screw in four more posts, again evenly spaced around the outside.

  • One post every five inches along one short side (this will be where you’ll put your headphones)
  • The same setup for the second set to counterbalance any weight on one end; this is also an “X” pattern when viewed from above.

Step Seven: Now that all thirty screws are in place, sand off some edges so everything looks clean and professional. Make sure no nail heads are poking out anywhere because they could hurt unsuspecting fingers.

4. Clothes Hanger DIY Headphone Stand

Clothes Hangers are a great material for DIY Headphone Stand. Clothes Hangers can be used to make a stand in various shapes and sizes, depending on your needs.

Clothes hanger stands were often made from coat-hangers before Clothes Hangers became commonplace in homes worldwide. Clothes Hanger DIY Headphone Stand often come in the shape of a Clothes Hangers, but they can also be made with other materials.

Some Clothes hangers are not good for Clothes Hanger DIY headphone stands because they do not have enough space to hang your headphones.

It would be best if you chose clothes-hanging hooks that will allow you to hang up at least two items from them and still leave room for your headphones on the hook between them.

5. Bicycle Hook DIY Headphone Stand

Bicycle Hook DIY Headphone Stand

These Bicycle Hook DIY Headphone Stands are made using a bicycle hook and some hardware. The first thing you will want to do is get your materials assembled, which include:

  • Bicycle hooks (available at any bike shop) and screws that match the size of the hook
  • Wood or acrylic strips for mounting surfaces, about one inch wide by four inches long with two holes drilled in them for attaching to studs on either side of the surface (can be found at many home stores like Home Depot).
  • Four bolts with nuts – Same length as strip width
  • Eight washers – same diameter as bolt head but smaller than the hole diameter
  • Bicycle safety wire – to wrap the washers and nuts
  • Tools for drilling holes in wood, acrylic, or metal surfaces.

Instruction:

Step One: The first step is to set up your work area with all of the materials you will need during assembly: a table cloth, bolts, washers, bicycle hooks (with screws), strips of wood or acrylic, and drill bits if they are not included in pre-drilled hole sets on available pieces. The next thing that needs to happen is marking out where each hook goes by placing it against the surface planned for use as an attachment point (i.e., desktop). Next, determine how high you want the stand from these points based on room considerations—Mark off this measurement along one edge of your lengthwise strips of wood or acrylic.

Step Two:

  1. Drill a hole in the center of each piece that you marked out – make sure to use a bit slightly smaller than your bolt diameter.
  2. Attach one end of the washer and bicycle hook on one side with an included screw (or similar), then place this through the hole drilled out for it before tightening it into place using an Allen wrench if necessary.
  3. Repeat this process for each other stand attachment point, following up by placing bolts through these holes and securing them to their corresponding hooks via headless screws also provided as part-of pre-drilled sets.
  4. Attach strips of wood or acrylic between every adjacent pair to be hung from something like metal surfaces.

Step Three: The last step is to attach the finished product to a secure surface. Bicycle hooks come with pre-drilled holes that are screwed into place, but you can also use two bolts to attach them by drilling pilot holes and using nuts as well.

Bicycle hooks provide a simple way for people who want to save money or work on their DIY projects to create headphone stands that they will enjoy for years.

In addition, most of the materials used in this project are inexpensive and readily available at your local hardware store or home improvement center, which makes it easier than ever before to start crafting these types of items from scratch!

Most of the materials used in this project are inexpensive and readily available at your local hardware store or home improvement center, making it easier than ever to start crafting these types of items from scratch! In addition, you don’t need any special skills like welding if you already have tools around your house. All you need is about $40.

Don’t forget small details like painting the finished product as well. Bicycle Hooks provide a simple way for people who want to save money or work on their DIY projects to create headphone stands that they will enjoy for years.


Conclusion

If you need a headphone stand and don’t have the cash to buy one, this is for you. We’ve compiled some of our favorite DIY options below so that you can find what suits your needs best!

The cost ranges from $0-$50, depending on how creative or simple you want to go with your design choice. There are many different stands out there, but you can choose our top 5 smart ideas at five price points.

Leave a Comment